You are here

Batch dryers

Batch dryers

Grain dryers with a skeleton construction

  Grain Initial
moisture
Final
moisture
           
  Corn 30% 15% 50 t 100 t 125 t 150 t 175 t 200 t
Daily output Wheat, barley 19% 15% 155 t 310 t 385 t 465 t 540 t 620 t
Rape 13% 7% 80 t 160 t 200 t 240 t 280 t 320 t
  Sunflower 13% 7% 26 t 53 t 66 t 79 t 92 t 106 t
Approximate charging
capacity
      15 t 24 t 27,5 t 31 t 34,5 t 39 t
Thermal input With dust removal system     750 kW 1,5 MW 2 MW 2,5 MW 2,75 MW 3 MW
Input Without dust removal system 10 kW 17 kW 23 kW 26 kW 32 kW 34 kW

The output is specified for corn with a moisture from 30% to 15%, at the temperature of +6°C, at a batch operation mode.

Additional options as: dust removal system, recirculation, complete isolation etc. are offered separately.
The producer reserves the right to make technical modifications without prior notice.

The grain intended for drying is transported with the charging device and poured into the dryer from above, into the charging segment (1). When pouring, the grain fills the selection packet (3), the whole drying chamber (2) and the charging segment. Air, preheated by the burner (7), in the burner chamber (4), sucked by the suction fan (6), moves to the drying chamber (2). In the chamber, hot air flows under the inlet roofs, where it disperses throughout the grain, heating it, and extracting moisture from it, escapes through the outlet roofs. Humid and cooled air is removed through the outlet roofs to the outlet chamber (5) and then outside. This dryer works in the batch operation mode - the gain
circulates in the drying column until the proper moisture content is achieved (about 2-3 times), and then it is cooled in the dryer column or optionally in the cooling column.

Grain dryers with a modular construction

Daily output 50 t / per day 100 t / per day 150 t / per day 200 t / per day
Czynnik suszący/ Powietrze / Powietrze / Powietrze / Powietrze /
chłodzący powietrze powietrze powietrze powietrze
Moc cieplna 600kW 1,2 MW 1,8 MW 2,5 MW
Moc elektryczna z odpylaniem 16,5 kW 31,5 kW 47 kW 63 kW
bez odpylania 9 kW 16,5 kW 25 kW 33 kW
Przybliżona pojemność zasypowa 17000 kg 23000 kg 29000 kg 37000 kg

Batch operation mode
Additional options as: dust removal system, recirculation, complete isolation etc. are offered separately.

The grain intended for drying is transported with the charging device and poured into the dryer from above, into the charging segment (1). When pouring, the grain fills the selection packet (3), the whole drying chamber (2) and the charging segment. Air, preheated by the burner (7), in the burner chamber (4), sucked by the suction fan (6), movesto the drying chamber (2). In the chamber, hot air flows under the inlet roofs, where it disperses throughout the grain, heating it, and extracting moisture from it, escapes through the outlet roofs. Humid and cooled air is removed through the outlet roofs to the outlet chamber (5) and then outside.

The output is specified for corn with a moisture from 30% to 15%, at the temperature of +6°C, at a batch operation mode.